logo 

office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

Insulation Protection Shield

FIG 800

APPLICATION:  Fig. 800 Insulation Protection Shields are used to distribute a concentrated support load over a larger area and thereby prevent the crushing of insulation at the support point.  Fig. 800 Insulation Protection Shields are commonly used on refrigeration and chilled water lines covered with either fiber glass or foam insulation.  Since there is no pipe-to-support contact, condensation or ice does not form as found when pipe shoes or clamps are attached directly to the pipe.
CONSTRUCTION:  Depending upon the outside diameter of the insulated piping, the shield is rolled from carbon steel ranging in thickness from 12 gauge to 18 gauge.
ALTERNATIVES:  AAA Technology offers Urethane Pipe Saddles, TRI*FOAM supports, as well as machined Wood Blocks, TRI*CAL supports, for the support of chilled water and refrigeration piping. Contact AAA Technology for details.
FINISHES AVAILABLE: Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING:  Specify figure number, exact outside diameter of insulated line by length of shield desired, name and finish, if other than black.
EXAMPLE:  Fig. 800, 12.625” Dia. X 14” long, Insulation Protection Shield, HDG.

insulation shield chart insulation shield

Hardware Main

 

insulation shield ribbed insulation shield iron pipe roller
FIG 800 FIG 803 FIG 806
clevis roller hanger rod roller hanger support roller
FIG 809 FIG 812 FIG 815
adjustable roller pipe roller chair iron pipe roll
FIG 818 FIG 821 FIG 824
pipe roller and stand adj pipe roller stand lg pipe roller stand
FIG 827 FIG 830 FIG 833
pipe protection saddle    
FIG 842-57