logo 

office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

Cast Iron Pipe Roller

FIG 824

APPLICATION:  A Fig. 824 Cast Iron Pipe Roller is the roll unit in our Fig. 827 and 830 Pipe Roll supports.  It can also be used to replace damaged roll units in existing installations as well as being incorporated in custom field fabricated pipe rolls.
CONSTRUCTION:  The Fig. 824 Cast Iron Pipe Roller is constructed of cast iron.  The Pipe Roller is designed so that the outside diameter of the cylinder to be supported, be it bare piping or insulated piping, contacts the two conical shapes on either end of the Pipe Roller.  The contact points are to be on the flat surface of the conical sections.
NOTE:  Use the size selection chart for assistance in determining the appropriate Pipe Roller for your application.
FINISHES AVAILABLE:  Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING:  Specify figure number, roll number, name and finish, if other than black.
EXAMPLE:  Fig. 824, Size 2, Cast Iron Pipe Roller, electro-plated.

pipe roller chart pipe roller

 

 

 

 

Hardware Main

 

insulation shield ribbed insulation shield iron pipe roller
FIG 800 FIG 803 FIG 806
clevis roller hanger rod roller hanger support roller
FIG 809 FIG 812 FIG 815
adjustable roller pipe roller chair iron pipe roll
FIG 818 FIG 821 FIG 824
pipe roller and stand adj pipe roller stand lg pipe roller stand
FIG 827 FIG 830 FIG 833
pipe protection saddle    
FIG 842-57