logo 

office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

Fig. 575 Adjustable Hook Beam Clamp

 

hook beam clamp APPLICATION: Fig. 575 Adjustable Hook Beam Clamps are recommended for use in suspending hanger rods from the center of over-head support beams where the flange thickness does not exceed .60 inches and where the flange widths are between 2 3/8” and 7”.
CONSTRUCTION: A Fig. 575 Adjustable Hook Beam Clamp consists of two malleable iron hook units connected at the bottom by a support bolt and at the widest span of the two hooks by an all thread rod with two hex nuts.  All components are carbon steel.
FINISHES AVAILABLE: Black, Hot Dip Galvanized or Electro-Plated.
ORDERING: Specify figure number, size, name and finish.
EXAMPLE: Fig. 575, Adjustable Hook Beam Clamp, HDG.

hook beam chart