logo 

office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

CB-Universal Concrete Insert Fig. 912

 

anchor bolt insert APPLICATION:  Fig. 912 CB-Universal Concrete Insert is designed to be embedded in concrete ceilings and used as an attachment point for equipment, pipe supports or structural steel.
INSTALLATION:  To install this unit properly, place the insert face down on the concrete form and nail it in place.   Reinforcing rods may be placed through the open area at the top of the insert.  Insert Fig. 915 Concrete Insert Nuts in the open area at the base of the insert and turn them 90 degrees to seat them properly.  Then thread the hanger rods into the Fig. 915 Concrete Insert Nuts until they are tight-ly in place.  Fig. 915 Concrete Insert Nuts must be ordered separately.
CONSTRUCTION:  A Fig. 912 CB-Universal Concrete Insert is constructed of malleable iron and is furnished in diameters from 3/8 through 7/8 inch.
FINISHES AVAILABLE: Black or Electro-Plated.
ORDERING: Specify figure number, rod diameter and name.
anchor bolt chart