office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

 Set Bolt Fig. 930


anchor bolt APPLICATION:  The Fig. 930 Set Bolt has a special flush shell is preferred where large quantities of shells are to be installed with power hammers. It has a tapered chucking end for mounting on a hammer chuck.  After the shell is installed, the chucking end is broken off flush with the surface by hitting the chuck laterally or by striking the shell with a hammer after the chuck is removed.  Cuttings pass through the shell and chuck.  The chuck does not need to be removed for cleaning, thus drilling time is greatly reduced.
:  Specify figure number, rod diameter and name.
:  Fig. 930, 5/8”, Self-Drilling Special Flush Shell.

anchor bolt chart