logo 

office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

 Offset Pipe Clamp
Fig. 763

 

offset pipe clamp APPLICATION:  Fig. 763 Offset Pipe Clamps are recommended for the support of general service piping where little or no insulation is required and where the support attachment point is a nearby wall or floor.
The maximum recommended service temperature for this pipe clamp is 650°F.
CONSTRUCTION:  Fig. 763 Offset Pipe Clamps are made from car-bon steel plate or bar stock and are provided with two bolts and nuts.
For easy attachment to the floor or wall, holes for bolts are provided in the feet.
See the data table for the diameter of the holes in each size clamp.
FINISHES AVAILABLE:  Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING:  Specify figure number, nominal pipe diameter, name and finish, if other than black.

pipe clamp chart

 

 

 

Hardware Main

u bolt u bolt light duty u bolt heavy duty
FIG 700 FIG 703 FIG 706
pipe clamp 2 bolt standard pipe clamp 2 bolt intemidiate pipe clamp 2 bolt heavy
FIG 712 FIG 715 FIG 718
pipe clamp 2 bolt x heavy 3 bolt pipe clamp standard 3 bolt pipe clamp intermidiate
FIG 721 FIG 724 FIG 727
pipe clamp 3 bolt heavy pipe clamp 3 bolt x heavy pipe clamp alloy
FIG 730 FIG 733 FIG 736
pipe clamp alloy intermidiate alloy yoke pipe clamp alloy yoke pipe clamp HD
FIG 739 FIG 748 FIG 751
riser pipe clamp offset pipe clamp extended pipe clamp
FIG 754 FIG 763 FIG 766
riser pipe clamp
FIG 711 FIG FIG