logo 

office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

Fabricated Turnbuckle

Fig. 430

turnbuckle APPLICATION:  Fig. 430 Fabricated Turnbuckles are used to connect two threaded hanger rods and to provide for relational adjustment of the hanger rod ends to or from each other. Fabricated Turnbuckles provide right hand threads on one end and left hand threads on the other end.  Thus, when the turnbuckle is twisted clockwise about the rod centerlines, the two hanger rod ends are pulled closer together and when the turn-buckle is twisted counterclockwise, the rod ends are moved apart from each other.  Adjustments of 6”, 12”, 18” and 24” are available.
CONSTRUCTION
:  Turnbuckles are made of carbon steel pipe and heavy hex nuts and are available for rod diameters of 1 inch to 4 1/4 inches.
FINISHES AVAILALE
:  Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING
:  Specify figure number, rod diameter, name and finish, if other than black.

turnbuckle chart