logo 

office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

Eye Rod

Fig. 457

eye rod FIG. 457 - Right Hand Thread
FIG. 457L - Left Hand Thread
FIG. 457N - Not Threaded

APPLICATION:  A Fig. 457 Eye Rod provides a means of attachment without the use of a Weldless Eye Nut.  A Fig. 457 Eye Rod and a Fig. 518 Beam Bracket with a Hex Head Machine Bolt are frequently used for the upper attachment of pipe hanger assemblies.
CONSTRUCTION::  Eye Rods (not welded) are available in diameters of 3/8 inch thru 2 ½ inches.  The inside diameter of the eye is de-signed to accommodate a bolt with a diameter equal to the value shown in the table column “A”.  Eye Rods are furnished with the standard thread lengths shown in the table column “B”.  Eye Rods can be furnished in any length, so long as adequate threading can be provided on the straight rod.
FINISHES AVAILABLE::  Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING: :  Specify figure number, rod diameter X Eye Rod length (center of eye to tip of rod), name and finish, if other than black.
ORDERING NOTE: :  Specify if non-standard thread lengths are re-quired.
EXAMPLE: F:  Fig. 457, ¾” diameter X 18” long, Eye Rod (not welded)

eye rod chart