Fig 430 Fabricated Turnbuckle

APPLICATION: Fig. 430 Fabricated Turnbuckles are used to connect two threaded hanger rods and to provide for relational adjustment of the hanger rod ends to or from each other. Fabricated Turnbuckles provide right hand threads on one end and left hand threads on the other end. Thus, when the turnbuckle is twisted clockwise about the rod centerlines, the two hanger rod ends are pulled closer together and when the turnbuckle is twisted counterclockwise, the rod ends are moved apart from each other. Adjustments of 6”, 12”, 18” and 24” are available.
CONSTRUCTION: Turnbuckles are made of carbon steel pipe and heavy hex nuts and are available for rod diameters of 1 inch to 4 1/4 inches.
FINISHES AVAILALE: Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING: Specify figure number, rod diameter, name and finish, if other than black.
EXAMPLE: Fig. 430, 2 ¼”, Fabricated Turnbuckle, HDG.

 

Fig 430 Fabricated Turnbuckle DIM

Fabricated Turnbuckle

Fig 430 Fabricated Turnbuckle

ROD SIZE A MAXRECLOAD (LBS) C = 6" WT EA C = 12" WT EA C = 18" WT EA C = 24" WT EA B
1 4960 230 362 494 626 1 3/8
1 1/8 6230 287 437 587 737 1 9/16
1 1/4 8000 373 554 736 917 1 7/8
1 1/2 11630 646 970 1294 1618 2 1/8
1 3/4 15700 943 1394 1844 2295 2 3/8
2 20700 1213 1714 2214 2715 2 3/4
2 1/4 27200 1545 2121 2896 3272 3
2 1/2 33500 2008 2723 3439 4154 3 1/4
2 3/4 41580 2500 3333 4166 4999 3 1/2
3 50580 3285 4410 5536 6662 3 3/4
3 1/4 60480 4485 6135 7785 9435 4 1/8
3 1/2 71280 5014 6557 8101 9644 4 3/8
3 3/4 82890 6042 7944 9847 11749 4 5/8
4 95400 7032 9134 11237 13339 4 7/8
4 1/4 109000 7384 9591 11799 14006 5 1/8