Fig 469 Paddle Eye Rod

APPLICATION: Paddle Eye Rods are designed for service where extreme loading is required and are ideally suited for use with our large Variable or Constant Effort Spring hangers.
CONSTRUCTION: Paddle Eye Rods are available in diameters of 1 ½ inches thru 5 inches, and are fabricated from SA-36 plate and bar stock. Threads are UNC, class 2 fit, four threads per inch for 2 ½ inch diameter and larger. A special bearing may be pressed into the paddle to allow for universal movement.
FINISHES AVAILABLE: Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING: Specify figure number, rod diameter X Eye Rod length (center of eye to tip of rod), name, with or without Bearing and finish, if other than black.

 

Fig 469 Paddle Eye Rod DIM

Paddle Eye Rod

Fig 469 Paddle Eye Rod

ROD SIZE AMAX. REC. LOAD (LBS.)WT EA, MIN , LBSWT/FT ADDITIONAL LBDEHWITH STD. THREAD L (MIN.)RTW
1 1/21163010661221 7/8172 1/23/45
1 3/4157001386 1/2122 1/42 1/8172 1/23/45
22070018117 1/2122 3/42 3/8182 3/415 1/2
2 1/42720022147 3/41232 5/8182 3/415 1/2
2 1/23350027178 1/2123 1/42 7/81931 1/25
2 3/44158035.9209123 3/43 1/81931 1/25
3 1/46048054.72811 1/21243 5/8213 1/21 1/27
3 1/27128097.33311 1/2154 3/43 7/8243 1/227
3 3/482890803712 3/41554 1/8253 3/427 1/2
495400974314 1/41554 3/8264 1/428 1/2
4 1/41090001274815 1/2185 1/44 5/8304 3/429 1/2
4 1/21230001315414 1/2185 3/44 7/8304 1/42 1/28 1/2
4 3/41380001546015 3/4185 3/45 1/8314 3/42 1/29 1/2
51540001756717 1/2186 1/45 3/83252 1/210