Fig 545 Top Beam Hook
APPLICATION: Fig. 545 Top Beam Hooks are recommended for use on the top flange of standard wide flange beams, I-beams, tees and angle trusses. Top Beam Hooks are not recommended where upward movement of the pipe may occur from surge or seismic loading.
CONSTRUCTION: A Fig. 545 Top Beam Hook consists of a bent flat bar with a hook on one end and an attachment hole for the support rod in the other end of the flat bar.
FINISHES AVAILABLE: Black, Hot Dip Galvanized or Electro-Plated.
ORDERING: Specify figure number, type, name and finish, if other than black.
EXAMPLE: Fig. 545, 4, Top Beam Hook, HDG.
Top Beam Hook
Fig 545 Top Beam Hook
| TYPE | MAX. REC. LOAD (LBS) | A (IN) | B (IN) | C (IN) |
|---|---|---|---|---|
| 1 | 300 | 3/8 | 5/16 | 1 |
| 2 | 500 | 1/2 | 3/8 | 1 |
| 3 | 700 | 5/8 | 7/16 | 1 |
| 4 | 1000 | 3/4 | 1/2 | 1 1/2 |
| 5 | 2000 | 7/8 | 9/16 | 1 1/2 |