Fig 569 Retrofit Capable Beam Clamp Retaining Strap

APPLICATION: Fig. 569 Retrofit Capable Beam Clamp Retaining Straps are recommended for use with various types of beam clamps in order to provide a more secure means of fastening to the structural member. This design enables the installation of the unit on a retrofit basis. NFPA #13 requires the use of retaining straps with all beam clamps installed in regions susceptible to earthquakes.
CONSTRUCTION: A Fig. 569 Retrofit Capable Beam Clamp Retaining Strap consists of a bent flat bar with a hook on one end and an attachment hole for the support rod or the beam clamp in the other end of the flat bar.
FINISHES AVAILABLE: Electro-Plated.
ORDERING: Specify figure number, rod diameter, name and finish.
EXAMPLE: Fig. 569, ½”, Retrofit Capable Beam Clamp Retaining Strap, Electro-Plated.

 

Fig 569 Retrofit Capable Beam Clamp Retaining Strap DIM

Retrofit Capable Beam Clamp Retaining Strap

Fig 569 Retrofit Capable Beam Clamp Retaining Strap

ROD Diam. A (in)Length (in)
3/8Specify
1/2Specify