Fig 572 Beam Clamp with Bolt and Nut
APPLICATION: Fig. 572 Beam Clamps with Bolts and Nuts are recommended for use in suspending hanger rods from the center of an overhead Truss Joist support beams.
CONSTRUCTION: A Fig. 572 Beam Clamp with Bolt and Nut consists of two bent flat bars as shown in the diagram above. Each flat bar is bent to go around the structural member and the other end of the flat bar is punched to accommodate an attachment bolt. Both bent flat bars are connected with a support bolt and hex nut to which a hanger rod can be attached.
FINISHES AVAILABLE: Black, Hot Dip Galvanized or Electro-Plated.
ORDERING: Specify figure number, size, name and finish.
EXAMPLE: Fig. 572, size 4, Beam Clamp with Bolt and Nut, HDG.