Fig 575 Adjustable Hook Beam Clamp without Extension Piece

APPLICATION: Fig. 575 Adjustable Hook Beam Clamps are recommended for use in suspending hanger rods from the center of overhead support beams where the flange thickness does not exceed .60 inches and where the flange widths are between 2 3/8” and 7”.
CONSTRUCTION: A Fig. 575 Adjustable Hook Beam Clamp consists of two malleable iron hook units connected at the bottom by a support bolt and at the widest span of the two hooks by an all thread rod with two hex nuts. All components are carbon steel.
FINISHES AVAILABLE: Black, Hot Dip Galvanized or Electro-Plated.
ORDERING: Specify figure number, size, name and finish.
EXAMPLE: Fig. 575, Adjustable Hook Beam Clamp, HDG.

 

Fig 575 Adjustable Hook Beam Clamp without Extension Piece DIM

Adjustable Hook Beam Clamp

Fig 575 Adjustable Hook Beam Clamp without Extension Piece

A(7/8"MAXROD 2 3/83     4     5     6     7     BOLTDAIM WTEA MAXRECLOAD(LBS)
CLAMPONLY 31/237/16 35/16 215/16 29/16 17/87/16 2.46 1365