Fig 600 Clevis Hanger

APPLICATION: A Light Duty Clevis Hanger provides for small vertical loads to be supported and for elevation adjustment of 1 1/16 inches to 2 ¼ inches depending upon the pipe diameter/hanger size. Temporary support is not required for the piping while elevation changes are being made. The lower nut adjusts the piping to the proper elevation and the upper nut, when locked into position, prevents loosening due to vibration.
CONSTRUCTION: A Fig. 600 Light Duty Clevis Hanger consists of a yoke and a support strap made from shaped carbon steel plate or bar stock and a joining bolt.
NOTE: Fig. 600 does not include hanger rod or nuts as shown in picture.
FINISHES AVAILALE: Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING: Specify figure number, nominal pipe diameter, name and finish, if other than black.
EXAMPLE; Fig. 600, 2 ½”, Light Duty Clevis Hanger, HDG.