Fig 609 Elongated Clevis Hanger
APPLICATION: An Elongated Clevis Hanger for Insulated Lines is used to support insulated piping and will accommodate a 2 inch thickness of insulation on ¾ inch to 1 ½ inches piping and a 4 inch thickness of insulation on 2 inches and larger piping. The insulation is applied around and over the clamp itself. An Elongated Clevis Hanger provides for elevation adjustment of 1 1/16 inches to 3 inches depending upon the pipe size, hanger size and insulation thickness. Temporary support is not required for the piping while elevation changes are being made.
CONSTRUCTION: A Fig. 609 Elongated Clevis Hanger for Insulated Lines consists of a yoke and a support strap made from shaped carbon steel plate or bar stock and a joining bolt.
NOTE: Fig. 609 does not include hanger rod or nuts as shown in the picture.
FINISHES AVAILABLE: Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING: Specify figure number, nominal pipe diameter, name and finish, if other than black.
EXAMPLE: Fig. 609, 8”, Elongated Clevis Hanger for Insulated Lines, HDG.
Elongated Clevis Hanger
Fig 609 Elongated Clevis Hanger
| NOM. PIPE DIA. | MAX. REC. LOAD (LBS.) | A (IN) | B (IN) | C (IN) | D (IN) | E (IN) | F (IN) | G (IN) | WT EA |
|---|---|---|---|---|---|---|---|---|---|
| 1/2 | 610 | 3/8 | 3 13/16 | 4 1/4 | 3 | 7/16 | 13ga x 7/8 | 12ga x 7/8 | 0.30 |
| 3/4 | 610 | 3/8 | 3 3/4 | 4 3/16 | 2 15/16 | 7/16 | 13ga x 7/8 | 12ga x 7/8 | 0.33 |
| 1 | 610 | 3/8 | 4 1/8 | 4 3/4 | 3 5/16 | 5/8 | 13ga x 7/8 | 12ga x 7/8 | 0.34 |
| 1 1/4 | 610 | 3/8 | 4 7/16 | 5 1/4 | 3 5/8 | 7/8 | 13ga x 7/8 | 12ga x 7/8 | 0.39 |
| 1 1/2 | 610 | 3/8 | 4 3/4 | 5 3/4 | 3 15/16 | 1 1/16 | 12ga x 7/8 | 12ga x 7/8 | 0.47 |
| 2 | 610 | 3/8 | 7 1/4 | 8 7/16 | 6 7/16 | 1 1/4 | 12ga x 7/8 | 12ga x 7/8 | 0.65 |
| 2 1/2 | 1130 | 1/2 | 8 13/16 | 10 3/16 | 7 3/4 | 1 15/16 | 9ga x 1 3/16 | 10ga x 1 3/16 | 1.25 |
| 3 | 1130 | 1/2 | 9 | 10 3/4 | 7 15/16 | 1 3/4 | 9ga x 1 3/16 | 10ga x 1 3/16 | 1.34 |
| 4 | 1430 | 5/8 | 10 1/8 | 12 3/8 | 8 13/16 | 2 1/8 | 8ga x 1 3/16 | 10ga x 1 3/16 | 1.92 |
| 5 | 1430 | 5/8 | 9 7/8 | 12 9/16 | 8 7/16 | 1 7/16 | 4ga x1 1/4 | 8ga x 1 1/4 | 2.58 |
| 6 | 1940 | 3/4 | 10 7/8 | 14 1/8 | 9 1/4 | 1 3/4 | 3ga x 1 1/2 | 8ga x 1 1/2 | 3.36 |
| 8 | 2000 | 3/4 | 12 1/4 | 16 9/16 | 10 7/16 | 1 7/8 | 3ga x 1 3/4 | 8ga x 1 3/4 | 5.08 |
| 10 | 3600 | 7/8 | 14 1/2 | 19 7/8 | 12 1/2 | 2 1/4 | 3/8 x 1 3/4 | 3ga x 1 3/4 | 9.08 |
| 12 | 3800 | 7/8 | 15 7/8 | 22 1/4 | 13 39/50 | 2 13/16 | 3/8 x 2 | 3ga x 2 | 11.54 |
| 14 | 4200 | 1 | 19 1/2 | 26 1/2 | 15 7/8 | 2 1/8 | 1/2 x 2 | 1/4 x 2 | 14.80 |
| 16 | 4800 | 1 | 23 | 31 | 17 1/8 | 2 5/8 | 1/2 x 2 1/2 | 1/4 x 2 1/2 | 21.00 |
| 18 | 4800 | 1 | 24 3/4 | 33 3/4 | 19 1/4 | 3 1/4 | 1/2 x 2 1/2 | 1/4 x 2 1/2 | 24.35 |