Fig 612 Clevis Hanger with PVC Coating

APPLICATION: A Standard Clevis Hanger with PVC Coating provides for sizeable loads to be supported and for an elevation adjustment of ½ inch to 3 ¾ inches depending upon the pipe diameter/hanger size. Temporary support is not required for the piping while elevation changes are being made. The lower nut adjusts the piping to the proper elevation and the upper nut, when locked into position, prevents loosening due to vibration. The PVC coating prevents electrolysis between the pipe and the hanger and it reduces transmitted noise and vibration.
CONSTRUCTION: A Fig. 612 A Standard Clevis Hanger with PVC Coating consists of a yoke and a support strap made from shaped carbon steel plate or bar stock and a joining bolt. The support strap is coated with PVC to a point just above the centerline of the pipe.
NOTE: Fig. 612 does not include hanger rod or nuts as shown in picture.
FINISHES AVAILABLE: Black.
ORDERING: Specify figure number, nominal pipe diameter and name.
EXAMPLE: Fig. 612, 4”, PVC Coated Std. Clevis Hanger.

Fig 612 Clevis Hanger with PVC Coating DIM

Clevis Hanger with PVC Coating

Fig 612 Clevis Hanger

NOM. PIPE DIA.MAX. REC. LOAD (LBS.)A STD. (IN)A NFPA (IN)B (IN)C (IN)D (IN)E (IN)F (IN)G (IN)H (IN)WT EA
1/26003/83/82 7/162 7/81 3/811/41/8 x 11/8 x 10.33
3/46003/83/82 9/163 1/161 3/411/41/8 x 11/8 x 10.38
16003/83/82 11/163 3/81 7/811/41/8 x 11/8 x 10.42
1 1/46003/83/82 15/163 7/8211/41/8 x 11/8 x 10.47
1 1/26003/83/83 1/84 1/82 1/411/45/32 x 11/8 x 10.59
26003/83/83 5/164 1/22 5/811/45/32 x 11/8 x 10.64
2 1/211001/23/84 1/165 1/23 1/815/163/16 x 1 1/43/16 x 1 1/41.1
311001/23/84 3/86 1/83 1/41 1/45/163/16 x 1 1/43/16 x 1 1/41.2
3 1/211001/23/84 3/46 5/83 1/21 1/43/83/16 x 1 1/43/16 x 1 1/41.35
414005/83/85 3/87 3/44 1/81 1/21/21/4 x 1 1/43/16 x 1 1/42.05
514005/81/26 1/895 1/161 1/21/21/4 x 1 1/43/16 x 1 1/42.85
619003/41/26 11/16105 3/41 1/25/81/4 x 1 1/23/16 x 1 1/43.7
820007/81/28 7/1612 3/46 3/425/81/4 x 1 3/43/16 x 1 3/45.1