Fig 627 Coated J Hanger for Pipe or Conduit

APPLICATION: A PVC Coated J Hanger for Pipe or Conduit is recommended for the suspension of non insulated piping systems where: 1.) electrolysis between the pipe and the hanger are of a concern or 2.) noise and/or vibration of the piping system is a problem. The side closure bolt enables contractors to easily insert pipe into the hanger and make the closure.
CONSTRUCTION: A PVC Coated J Hanger for Pipe or Conduit consists of a piece of carbon steel shaped to the proper configuration and a side bolt with a nut. The support strap is coated with PVC to a point just above the centerline of the pipe.
FINISHES AVAILABLE: Electro Plated before shaped then PVC coated.
ORDERING: Specify figure number, nominal pipe diameter and name.
EXAMPLE: Fig. 627, 2 ½ ”, PVC Coated J Hanger.

Fig 627 Coated J Hanger for Pipe or Conduit DIM

PVC Coated J Hanger

Fig 627 J Hanger for Pipe or Conduit

NOM. PIPE DIA.MAX. REC. LOAD (LBS.)A (IN)B (IN)C (IN)D (IN)E (IN)F (IN)WT EA
1/24003/82 5/81 3/47/161 1/21 15/160.18
3/44003/82 7/81 7/87/161 11/162 1/80.21
14003/82 15/161 15/167/161 13/162 15/160.22
1 1/44003/83 1/427/162 1/162 5/80.25
1 1/24003/83 9/162 3/167/162 7/162 7/80.27
24003/83 11/162 1/87/162 9/163 1/160.29
2 1/25001/24 7/162 7/169/163 3/163 5/80.64
35001/24 13/162 9/169/163 1/24 1/160.72
3 1/25001/25 1/82 5/89/163 3/44 3/80.84
45505/86 1/83 3/169/164 5/85 3/161.38
55505/86 3/43 1/49/165 1/165 3/41.62
66003/47 3/43 9/169/165 13/166 5/82.49
87607/89 3/163 15/169/166 15/1682.91
107607/810 3/43 7/89/167 5/89 1/83.15