Fig 642 Offset J Hook
APPLICATION: An Offset J Hook is recommended for supporting a non insulated piping system from a wall or similar adjacent member when there is a clearance of 1”.
CONSTRUCTION: An Offset J Hook consists of a piece of carbon steel shaped to the proper configuration as shown in the diagram above.
FINISHES AVAILABLE: Electro Plated and Hot Dip Galvanized.
ORDERING: Specify figure number, nominal pipe diameter, name and finish.
EXAMPLE: Fig. 642, 3”, Offset J Hook, HDG.

Offset J Hook
Fig 642 Offset J Hook
NOM PIPE SIZE | MAX REC LOAD (LBS) | A (IN) | B (IN) | C (IN) | D (IN) | MATERIAL SIZE | G | WT EA |
---|---|---|---|---|---|---|---|---|
1/2 | 350 | 6 3/8 | 1 5/8 | 5 | 9/16 | 1/4 x 1 1/4 | 1 | 0.55 |
3/4 | 350 | 6 1/2 | 1 11/16 | 5 | 9/16 | 1/4 x 1 1/4 | 1 | 0.59 |
1 | 350 | 6 11/16 | 1 15/16 | 5 | 9/16 | 1/4 x 1 1/4 | 1 | 0.82 |
1 1/4 | 350 | 6 13/16 | 2 1/16 | 5 | 9/16 | 1/4 x 1 1/4 | 1 | 0.84 |
1 1/2 | 600 | 6 15/16 | 2 7/16 | 5 | 9/16 | 1/4 x 1 1/2 | 1 | 1.09 |
2 | 600 | 7 3/16 | 2 7/16 | 5 | 9/16 | 1/4 x 1 1/2 | 1 | 1.15 |
2 1/2 | 600 | 7 7/16 | 2 11/16 | 5 | 9/16 | 1/4 x 1 1/2 | 1 | 1.23 |
3 | 600 | 7 3/4 | 3 | 5 | 9/16 | 1/4 x 1 1/2 | 1 | 1.39 |
3 1/2 | 600 | 8 | 3 1/4 | 5 | 9/16 | 1/4 x 1 1/2 | 1 | 1.48 |
4 | 600 | 8 1/4 | 3 1/2 | 5 | 9/16 | 1/4 x 1 1/2 | 1 | 1.58 |
5 | 700 | 10 | 4 3/16 | 6 1/4 | 9/16 | 1/4 x 2 | 1 | 2.4 |
6 | 700 | 11 | 4 11/16 | 7 | 9/16 | 1/4 x 2 | 1 | 2.8 |