Fig 763 Offset Pipe Clamp
APPLICATION: Fig. 763 Offset Pipe Clamps are recommended for the support of general service piping where little or no insulation is required and where the support attachment point is a nearby wall or floor. The maximum recommended service temperature for this pipe clamp is 650 °F.
CONSTRUCTION: Fig. 763 Offset Pipe Clamps are made from carbon steel plate or bar stock and are provided with two bolts and nuts. For easy attachment to the floor or wall, holes for bolts are provided in the feet. See the data table for the diameter of the holes in each size clamp.
FINISHES AVAILABLE: Black, Hot Dip Galvanized, Electro-Plated, or Painted.
ORDERING: Specify figure number, nominal pipe diameter, name, and finish, if other than black.
EXAMPLE: Fig. 763, 3”, Offset Pipe Clamp, Painted.
Offset Pipe Clamp
Fig 763 Offset Pipe Clamp
| PIPE DIA. (IN) | MAX. REC. LOAD (LBS) | A (IN) | B (IN) | BAR STOCK DIM. C (IN) | BOLT HOLE DIA. D (IN) | BOLT DIA. & LENGTH E (IN) | WT EA |
|---|---|---|---|---|---|---|---|
| 3/4 | 200 | 7 3/16 | 2 1/2 | 1/4 x 1 1/4 | 7/16 | 3/8 x 1 | 1.25 |
| 1 | 200 | 7 9/16 | 2 5/8 | 1/4 x 1 1/4 | 7/16 | 3/8 x 1 | 1.33 |
| 1 1/4 | 200 | 7 7/8 | 2 13/16 | 1/4 x 1 1/4 | 7/16 | 3/8 x 1 | 1.42 |
| 1 1/2 | 200 | 8 1/4 | 2 15/16 | 1/4 x 1 1/4 | 7/16 | 3/8 x 1 | 1.49 |
| 2 | 410 | 9 1/8 | 3 3/16 | 1/4 x 1 1/4 | 7/16 | 3/8 x 1 | 2.03 |
| 2 1/2 | 410 | 10 1/2 | 3 7/16 | 1/4 x 1 1/4 | 7/16 | 3/8 x 1 | 2.25 |
| 3 | 410 | 11 1/8 | 3 3/4 | 1/4 x 1 1/4 | 7/16 | 3/8 x 1 | 2.5 |
| 3 1/2 | 410 | 1 5/8 | 4 | 1/4 x 1 1/4 | 7/16 | 3/8 x 1 | 2.75 |
| 4 | 600 | 12 1/2 | 4 1/4 | 1/4 x 1 1/2 | 9/16 | 1/2 x 1 1/2 | 3.68 |
| 5 | 600 | 13 3/4 | 4 3/4 | 1/4 x 1 1/2 | 9/16 | 1/2 x 1 1/2 | 4.25 |
| 6 | 850 | 16 1/2 | 5 5/16 | 3/8 x 1 1/2 | 9/16 | 1/2 x 1 1/2 | 6.8 |
| 8 | 850 | 18 5/8 | 6 5/16 | 3/8 x 1 1/2 | 9/16 | 1/2 x 1 1/2 | 8.2 |