Fig 827 Pipe Roller and Stand

APPLICATION: A Fig. 827 Pipe Roller and Stand is used to support piping where 1.) significant movement along the axis of the piping at the support location occurs due to thermal expansion or contraction of the piping, 2.) support is to be provided from a beam or other structural member located below the piping and 3.) vertical adjustment of the pipe roll is not necessary. This Pipe Roller and Stand allows axial movement of the piping with virtually a negligible amount of frictional resistance to the movement. Vertical adjustment can only be achieved by shimming under the stand at the time of installation. A Fig. 827 Pipe Roller and Stand is designed to be bolted or welded to the supporting structural member.
CONSTRUCTION: A Fig. 827 Pipe Roller and Stand consists of a Fig. 824 Cast Iron Pipe Roll, a base fabricated of carbon steel plate and a carbon steel roll rod. With the Cast Iron Pipe Roll properly positioned on the roll rod, the roll rod rests securely in the V notch in the steel support frame.
NOTE: See size selection chart for assistance in determining the appropriate Pipe Roller and Stand number for your application.
FINISHES AVAILABLE: Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING: Specify figure number, Pipe Roller and Stand number, name and finish, if other than black.
EXAMPLE: Fig. 827, No. 2, Pipe Roller and Stand, electro-plated.

Fig 827 Pipe Roller & Stand DIM

Pipe Roller and Stand

Fig 827 Pipe Roller & Stand

NOM. PIPE DIA. (IN)CDEFGHJKMWT EAMAX REC LOAD (LBS)
268 3/83 11/166 3/811 3/49/163 3/845.08390
2 1/268 3/83 15/166 3/811 3/49/163 3/845.08390
368 3/84 1/46 3/811 3/49/163 3/845.08390
3 1/268 3/84 1/26 3/811 3/49/163 3/845.08390
469 7/857 7/8129/164 3/44 1/46.31650
569 7/85 9/167 7/8129/164 3/44 1/46.31950
669 7/86 1/167 7/8129/164 3/44 1/46.31950
888 5/88 13/16413 3/811/167513.652100
1088 5/89 7/8413 3/811/167513.652100
1281111 7/165 3/413 7/813/1696213075
1481112 1/165 3/413 7/813/1696213075
161012 3/813 5/86 3/414 1/413/1610 3/86 1/234.234980
181012 3/814 11/166 3/414 1/413/1610 3/86 1/234.234980
201012 3/815 11/166 3/414 1/413/1610 3/86 1/234.234980
241013 1/217 11/167 1/214 3/813/1611 1/26 1/2406100
30101721 3/41015 1/81 1/1614 1/47 3/471.327500
36122025 3/41215 3/41 3/817914712000
42122028 7/81215 3/41 3/817914712000