Hold Down Clamps
Also Known as Dynamic Restraints for Vibration Control
Hold down clamps, wedge blocks, guide clamps, and pulsation clamps are engineered and designed for vibration control and guiding piping system movement. A variety of bearings such as PTFE and elastomeric are available.
Hold Down Clamps Pipe Supports
AAA Technology manufactures Hold Down Clamps with a tightening gap between the feet of the clamp and the top of sole plate or the top of the support beam beneath the clamp. Guide Clamps without a tightening gap between the feet of the clamp and the top of sole plate or the top of the support beam beneath the clamp are also available. Guide Clamps are offered with user specified gaps between the pipe and the Clamp allowing limited lateral movement of the pipe until the pipe is stopped by the Clamp.
Hold Down Clamps and Guide Clamps are available with and without Wedge Blocks. Hold Down Clamps and Guide Clamps are also available in unreinforced models as well as reinforced models with a single stiffening gusset or with twin stiffening gussets and with a variety of liners including Fiberglass Reinforced Plastic, PVC, PTFE Bearing Pad, Elastomeric Preformed Fabric Pad—Plain or with a layer of PTFE. Steel finishes available include Hot Dip Galvanized, Black, Red Oxide Primer and CZ-11. Special paint systems are available upon request.
The category of clamps called Hold Down Straps or Pulsation Clamps can come in all the same coatings and linings. Click on the special link below to see what we offer.