Pipe Shoes
AAA TECHNOLOGY PIPE SHOES AND PIPE SADDLES
Pipe Shoes and Supports offered are built in three categories: Split Beam Construction, Welded Flat Bar or Cut/Burned Plate or Double Upright Construction in accordance to your requirements. In addition, we can supply these in various Guided Shoe Assemblies.
These shoes can also be constructed with our TRI*SLIDE™ low friction slide bearings in one of the following combinations: 1. PTFE upper & lower bearings, 2. Stainless Steel upper & PTFE lower bearings, 3. Stainless Steel upper & Graphite lower bearing, 4. Graphite upper & Graphite lower bearing or any other combination that you require.
Pipe Shoe with U-Bolts
Pipe Shoes – AAA Technology manufactures an extensive line of Pipe Shoes to fit every customer’s needs. Shoes are manufactured in “Weld-on style”, “U-Bolt-on style” and “Clamp-on style” and in single upright or double upright designs. Pipe Shoes are also available with or without end gusset reinforcement. Light duty fabricated pipe shoes are also available as well as the special TRI-LOCK™ pipe shoe for heat-traced lines.
Pipe Shoes can be provided with a variety of liners including Fiberglass Reinforced Plastic, PVC, PTFE Bearing Pad, Elastomeric Preformed Fabric Pad—Plain or with Layer of PTFE. Steel finishes available include Hot Dip Galvanized, Black, Red Oxide Primer and CZ-11. Special paint systems are available upon request. TRI-SLIDE low-friction bearings are also available on AAA Technology pipe shoes and saddles. AAA Technology also manufactures non-metallic pipe shoes that isolate the piping system electrically and prevents corrosion between the pipe and the support steel.
Pipe Saddles – AAA Technology manufactures pipe saddles in carbon steel, alloy and stainless steel for a wide variety of pipe diameters and BOPs. Pipe Saddles can be provided with a variety of liners including Fiberglass Reinforced Plastic, PVC, PTFE Bearing Pad, Elastomeric Preformed Fabric Pad—Plain or with Layer of PTFE. Steel finishes available include Hot Dip Galvanized, Black, Red Oxide Primer & CZ-11. TRI-SLIDE low-friction bearings are also available on AAA Technology saddles.
Flange and Valve Supports – The Fig. 5550 TRI*FLANGE™ flange clamp and base are suitable for clamping around a pair of pipe flanges and providing vertical support while allowing a limited amount of lateral movement with low friction bearings.
Fig 5000 - Split Beam Pipe Shoe
Fig 5001 - Split Beam Pipe Shoe with Gussets
Fig 5010 - Split Beam Pipe Shoe with U-Bolts
Fig 5011 - Split Beam Pipe Shoe with U-Bolts and Gussets
Fig 5020 - Split Beam Pipe Shoe with Clamps
Fig 5021 - Split Beam Pipe Shoe with Clamps and Gussets
Fig 5130 - Fabricated Clamp Shoe
Fig 5131 - Fabricated Clamp Shoe with Gussets
Fig 5140 - TRI-LOCK Clamp Shoe
Fig 5200 - Double Upright Pipe Shoe
Fig 5201 - Double Upright Pipe Shoe with Gussets
Fig 5210 - Double Upright Pipe Shoe with U-Bolts
Fig 5211 - Double Upright Pipe Shoe with U-Bolts and Gussets
Fig 5220 - Double Upright Pipe Shoe with Clamps
Fig 5221 - Double Upright Pipe Shoe with Clamps and Gussets
Fig 860 Pipe Saddle
Fig 863 Pipe Saddle U-Bolt
Fig 866 Adjustable Pipe Saddle Support
Fig 5500 - Fabricated Pipe Saddle
Fig 55XX Flange Clamps
Fig 555X TRI-FLANGE Flange Clamps and Supports
TRI-TEK Non-metallic Pipe Shoe
TRI-COMPOSITE Pipe Shoe FRP and Polyurethane
Clamp-On Split Beam Pipe Shoes
U-Bolt Split Beam Pipe Shoes
PIpe Shoes with Banding Slots
Weld-on Pipe Shoes
Double Upright Pipe Shoes
Large Diameter Pipe Saddle
AAA Pipe Shoes for Hot Service LNG Lines
