Adjustable Pipe Stands
TRI-STAND™ ADJUSTABLE PIPE STAND PIPE SUPPORTS
TRI-STAND™ pipe stands have been developed in order to provide the ability to support pipe in an open area where no other means of supporting pipes such as pipe racks are available. Each TRI-STAND™ provides positive support for one pipe and is also adjustable vertically. TRI=STAND™ pipe stands are available in models that accommodate 1” Up & Down adjustment and 2” Up & Down adjustment.
Pipe Stand with Cradle
TRI-STAND™ adjustable pipe stands are manufactured in models that allow for 1” Up and Down adjustment and 2” Up and Down adjustment. TRI-STAND™ Pipe Stands are available without base plates and with base plates with or without slots. TRI-STAND™ pipe stands are available with a variety of top components in order to give the user the most flexibility in pipe support selection. Top components are available in: 120 degree cradles, cradles with U-Bolts including elbow cradles, Flat tops, Flat Tops with U Bolts, Flat Tops with TRI-BOLTs™ and TRI-GUARD™ bars and Flange Supports. The finishes and liners listed above under Hold Down Clamps and Guide Clamps are also available for these various designs.
FIG. 5600 SERIES TYPE “C” 120º Contoured Unreinforced Cradle without Base Plate
FIG. 5600 SERIES TYPE “C” 120º Contoured Unreinforced Cradle with Base Plate
FIG. 5600 SERIES TYPE “C” 120º Contoured Reinforced Cradle without Base Plate
FIG. 5600 SERIES TYPE “C” 120º Contoured Reinforced Cradle with Base Plate
FIG. 5600 SERIES TYPE “C1U” Contoured Cradle & TRI*BOLT without Base Plate
FIG. 5600 SERIES TYPE “C1U” Contoured Cradle & TRI*BOLT with Base Plate
FIG. 5600 SERIES TYPE “C2U” Contoured Cradle & 2 TRI*BOLTs without Base Plate
FIG. 5600 SERIES TYPE “C2U” Contoured Cradle & 2 TRI*BOLTs with Base Plate
FIG. 5600 SERIES TYPE “F1U” Flat Top with 1 TRI*BOLT & 1 TRI*GUARD without Base Plate
FIG. 5600 SERIES TYPE “F1U” Flat Top with 1 TRI*BOLT & 1 TRI*GUARD with Base Plate
FIG. 5600 SERIES TYPE “F2U” Flat Top with 2 TRI*BOLT & 2 TRI*GUARD without Base Plate
FIG. 5600 SERIES TYPE “F2U” Flat Top with 2 TRI*BOLT & 2 TRI*GUARD with Base Plate
FIG. 5600 SERIES TYPE “F2UB” Flat Top with Knock-Out Block & 2 TRI*BOLTs without Base Plate
FIG. 5600 SERIES TYPE “F2UB” Flat Top with Knock-Out Block & 2 TRI*BOLTs with Base Plate
FIG. 5600 SERIES TYPE “F” Flat Top without Base Plate
FIG. 5600 SERIES TYPE “F” Flat Top with Base Plate
FIG. 5600 SERIES TYPE “FS” Flange Support without Base Plate
FIG. 5600 SERIES TYPE “FS” Flange Support with Base Plate
FIG. 5600 SERIES TYPE “EB” Elbow Support without Base Plate
FIG. 5600 SERIES TYPE “EB” Elbow Support with Base Plate
ADJUSTABLE STABILITY PIPE STANDS
These adjustable pipe stands are affordable and easily installed where piping exists in open areas. They consist of two vertical columns with base plates which can be either welded or anchored to the surface. The versatility of these pipe supports is clear: They can be easily adjusted to any height thus making unnecessary precise calculations or forethought.
The cross member forming the trapeze support is typically made from two lengths of angle. Its height is adjusted using hex nuts via the length of threaded rod in the vertical members.
Applying corrosion protection and pipe restrains are all possible with this adjustable pipe stand. Holes can be drilled into the cross member to accommodate TRI-BOLT coated U-Bolts, and TRI-GUARD thermoplastic bars can adhered to the top of the cross member to isolate the pipe from metal-on-metal contact, thus conferring a long life of service
Dual Vertical Pipe Stand Columns
Single Level Pipe Stand
Double Level Pipe Stand
Pipe Stand Crossmember Components
Crossmember Connection from Above
